| |
|
| |
The Kurt J Lesker Company, an international manufacturer and distributor of
high vacuum and ultra high vacuum components and systems, who also offer
vacuum technology solutions for research and production applications,
exhibited for the fourth year at Culham recently. UK Sales Manager,
Dr Gilles Rousseau, commented: "It is always a good event. With the amount
of activities involved in the European fusion industry, Culham is an
important site for us. The exhibition was well received, and the support
from the staff on site was a great help." For further information please
contact: gillesr@leskerltd.com or 01424 458 100; website: www.lesker.com
|
.jpg)
Kurt J Lesker exhibition
|
|
|
| |
|
|
| |
Setaram Instrumentation Exhibition
|
Setaram Instrumentation exhibited its range of thermo analytical instruments for the first time at Culham. It was a very successful exhibition with new contacts made with scientists and with a number of companies sited at Culham. Setaram's range of instruments include calorimetry, thermogravimetry and
thermal conductivity systems all of which can provide fundamental material properties.
If you would like further information about Setaram's product range please contact rod.bottom@setaram.com or visit our website www.setaram.com
|
|
|
| |
|
|
| |
The relaxed, informal setting of Culham Science Centre’s foyer was the ideal place for scientists to see and discuss Hamamatsu Photonics latest products. Hamamatsu has a range of optoelectronic devices including photomultiplier tubes, image intensifiers, photodiodes, silicon detectors, CCDs and CCD cameras. They have a long history supplying products for high-energy physics and nuclear physics applications. Sales Engineer Richard Biggs commented: ”It was good to discuss the diagnostics requirements. Our latest technology such as the Multi-Pixel Photon-Counting device (MPPC), which features Geiger-mode avalanche photodiode structure for ultra-low-level light detection, was of great interest, especially in multi-channel arrays.” For more information please visit Hamamatsu’s website www.hamamatsu.co.uk, you can speak to a sales engineer direct on 01707 294888 or email info@hamamatsu.co.uk.
|
Hamamatsu exhibition
|
|
|
| |
|
|
| |
Tescom exhibition
|
Tescom Corporation, the high quality pressure regulator & bespoke pressure control systems company, recently had the pleasure of exhibiting at Culham. Tescom supplies standard as well as customised solutions for pressure & flow control applications of gases & liquids from vacuum to 30,000psi. The recent exhibition at Culham provided a great opportunity to demonstrate the ER3000, Tescom's Electropneumatic PID controller, which is ideal for applications requiring remote or automated pressure control.
Stephen Addy, Country Manager UK & Ireland, commented “We were delighted to have the opportunity to exhibit at Culham. The foyer location provided a relaxed setting in which to present & discuss our range of products and to explore current and future opportunities with the engineers on-site. We were very pleased with the quality & quantity of enquiries we received and thank all who took the time to stop by.”
For further information you can contact Shona Fergusson, Territory Manager, South UK direct on 01296 711798 or shona.fergusson@emerson.com or why not visit our website at www.tescom-europe.co.uk.
|
|
|
| |
|
|
| |
Schroff leading manufacturers of electronic packaging systems exhibited at Culham for the fifth year. “We place great importance in meeting customers to inform them about the extensive product range and more importantly updating people with the latest new developments”, said Denis Brown, Regional Sales Manager. Based on globally standardised subracks, cases and cabinet systems, Schroff design and build complete packaging solutions. Schroff welcomed the opportunity to display a detailed selection of their product range to Culham staff. Its ATCA range including the MicroTCA product was of special interest this year. The ATCA & MicroTCA development chassis was featured along with the range of backplanes, power supplies, cooling units and shelf managers. Denis Brown: “The exhibition was the ideal opportunity to meet new and existing customers and to illustrate the breadth of our products and services. Our Embedded systems are not an easy product to demonstrate through catalogues and websites alone and the chance to demonstrate on a face to face basis the specific product features is more than welcome.
We wish to thank all visitors and look forward to returning in 2010." For further information contact Denis on 07850 911573, denis_brown@schroff.co.uk & visit http://www.schroff.co.uk
|
.jpg)
Scroff UK Exhibition
|
|
|
| |
|
|
| |
Varian Vacuum Exhibition
|
Varian Vacuum who recently exhibited at Culham found the experience very beneficial as it allowed some of the researchers the opportunity to discuss technical matters in an informal setting. In addition it also provided scientists and engineers from UKAEA with the possibility to see new products and methods of technology for creating the required vacuum levels. For more information please contact David Gray on 01865 291500 or email david.gray@varianinc.com, or visit http://www.varianinc.com
|
|
|
| |
|
|
| |
PPM once again took advantage of presenting its products at what for them is an annual event in the foyer at Culham. Sales Manager Dave Willford said “new for us this year were our DAU thermal management products: liquid cooling, air cooling and specialist heat pipes: This attracted the expected interest and came as a complement to our standard line of Power Electronics components and design software. Of equal interest to the Power Supplies group looking at issues on MAST was a recently introduced modular power supply system from TDK Lambda. This uses standard 50kW DC power modules, which can be configured up to 300kW at 40kV”. Dave went on to say that “most encouraging of all was the varied interest shown in our full range of pulsed power, power electronics, high voltage and test and instrumentation range for a variety of fusion applications”. For more information please email dwillford@ppm.co.uk, or call 01793 784389 or visit http://www.ppmpower.co.uk
|
PPM Exhibiton
|
|
|
| |
|
|
| |
K-Tech Supplies Exhibition
|
K-TECH Supplies Ltd, who ‘provide leading technology products’ principally to those with vacuum requirements for research and development, production and industry applications, recently exhibited at Culham. This was their first exhibition here and was deemed a huge success by Company Director Keith Reilly, who commented: “This has been a very encouraging first event for our new company, with a number of attractive enquiries being received.” A good deal of interest was aimed at the Deposition side of the business, with K-TECH having their own branded Magnetrons and E-beam sources. In addition, on display were custom fabricated vacuum assemblies, valves, and feedthroughs, as well as a broad selection of standard ‘off the shelf’ vacuum components. K-TECH plan to make this a regular venue for exhibiting. For more information, please contact Keith Reilly at keith@ktechsupplies.co.uk, or call directly on 07891 079789. Alternatively, please visit our website at www.ktechsupplies.co.uk.
|
|
|
| |
|
|
| |
As in recent years, Goodfellow Cambridge Limited attended a foyer exhibition at the Culham site in April. For the first time we were accompanied by Ian Doggett from The Technical Glass Company which became part of the Goodfellow Group in April 2008,
Goodfellow and The Technical Glass Company have many customers on site so the foyer exhibition is a very cost effective way to meet existing and potential customers.
As usual the exhibition met all our expectations, Goodfellow and Technical Glass look forward in attending again in 2010.
For further information contact http://www.goodfellow.com, www.technicalglass.co.uk. or email info@goodfellow.com or to speak with one of our representatives at Goodfellow on 01480 424800, or Technical Glass 01440 730660
|
Goodfellow Cambridge Exhibition
|
|
|
| |
|
|
| |
Vaccum Services exhibition
|
Vacuum Services Ltd had the pleasure of exhibiting a range of its products to the staff of Culham.
Their partners Plug-In also joined them at the exhibition, and their range of Hermetic feedthroughs and bespoke special solutions to customer needs, were very well received by several members of the Culham staff.
Vacuum Services Ltd products were also generating a great deal of interest, from their simple standard range of vacuum fittings/components through to the new range of Vacuum pumps that they now offer, and also the Vacuum Chamber manufacturing facility that they have.
“We certainly hope to generate some business, with several of the people who visited our stand and it was a very worthwhile visit to Culham for us, and we would certainly return again next year” said Steve Booth.
For further information on any of our products, please contact steve@vacuumservices.ltd.uk or visit our website at www.vacuumservices.ltd.uk
|
|
|
| |
|
|
| |
Polyrack Tech-Group recently took the opportunity to exhibit for the first time at the Culham Sciecne Centre. Cliff White, Polyrack Sales Manager, said that judging by the interest shown in our product range, I feel that our extensive 19” enclosure / Subrack range and our 30 years experience in the design and manufacturing of Bespoke / Custom Enclosures will suit many applications & projects at Culham. Overall we had a good day and received some positive enquiries. For further information please contact Cliff White (Sales Manager UK & Ireland) on 07716344465 or email : cliff.white@polyrack.com, or visit http://www.polyrack.com
)
|
.jpg)
Polyrack Exhibition
|
|
|
| |
|
|
|
| Views expressed in Fusion Business do not necessarily reflect those of the EURATOM/CCFE Fusion Association. no liability is accepted whatsoever for errors or omissions in Fusion Business. This work is funded jointly by the United Kingdom Engineering and Physical Sciences research Council (EPSRC) and by EURATOM. If you would like to comment on the content of this ezine, please contact: nick.holloway@ccfe.ac.uk |
|
|
Ezine home
.jpg)
TOP
.jpg)
.jpg)